Grain Systems PNEG-1935 - Manual (Page 26)

5. Operations
26 PNEG-1935 Vision Hybrid for Portable Dryers
2. Moisture Control Setup: The moisture control setup operations are described in
greater detail in the Moisture Control Options Chapter on Page 38 .
Figure 5H
Figure 5I
3. Unload Parameters:
a. Set Maximum Unload Rate: The meter roll speed setpoint cannot be set higher than this value.
This prevents choking downstream augers.
b. Set Minimum Unload Rate: The meter roll speed setpoint cannot be set lower than this value.
(See Figure 5J.)
Figure 5J