Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1597 User Manual
Page 13
Advertising
4. Assembly
PNEG-1597 Sweep Tractor and Control Panel Assembly Instructions
13
7. Assemble the tire and wheel assemblies securely to the wheel hubs using five (5) 1/2" flat washers
and lock nuts.
NOTE: Remove the screws or nails that are present in the tires to contain the foam in the tires when
they are made. The treads of the tires should be in the forward direction.
shows
the proper orientation of the tire and wheel assemblies.
8. Assemble the strut bracket to the tractor frame using four (4) 3/8"-16 x 1" flange bolts and serrated
flange nuts.
Figure 4C
Advertising