Assembly – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1597 User Manual
Page 15
Advertising
![background image](/manuals/277641/15/background.png)
4. Assembly
PNEG-1597 Sweep Tractor and Control Panel Assembly Instructions
15
11. Bolt the four (4) 5/8"-11 x 6" threaded rods to the tractor frame using one 5/8"-11 hex nut for
Figure 4E
12. Place one 5/8"-11 hex nut onto each rod in a temporary position. These will hold the motor plate in
place.
Figure 4F
Advertising