Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1597 User Manual
Page 14
Advertising
4. Assembly
14
PNEG-1597 Sweep Tractor and Control Panel Assembly Instructions
9. Bolt the shield bracket to the front of the tractor frame using two (2) 3/8"-16 x 3-1/2" hex head
cap screws, two (2) flat washers (only on the bottom slot of the bracket) and hex nuts.
10. Attach the weight plate to the tractor frame using two (2) 3/8"-16 x 1" flange bolts and serrated
flange nuts.
Figure 4D
Advertising