Grain Systems Tanks PNEG-1094 User Manual
Page 38
Advertising
6. Installation
38
PNEG-1094 Farm Grain Bin - 4" Corrugation
Ladder Section Assembly
Two (2) splice plates (LDR 4317) are required to attach each ladder section. The head of the bolt should
be to the inside of the ladder with the splice plate on the outside as shown in
. Use 5/16" x 3/4"
bolts for all connections.
Figure 6H
NOTE: With most installations, the ladder section installed
to reach the ground will need to be cut to fit.
Advertising