Platform support assembly – Grain Systems Tanks PNEG-1094 User Manual
Page 39
Advertising
6. Installation
PNEG-1094 Farm Grain Bin - 4" Corrugation
39
Platform Support Assembly
When starting the platform support, attach the mounting angle to the sidewall of the grain bin. Refer to
for the correct holes to be used by the platform. Attach the angle using 5/16" x 3/4" bolts and nuts,
tighten at this time. Next, bolt the support angle to the mounting angle again using the proper holes.
Attach the brace angle to the mounting angle as shown in
. Use 5/16" x 3/4" bolts and nuts for
all connections.
Figure 6I
Advertising