Eave safety cage – Grain Systems Tanks PNEG-1094 User Manual
Page 43
6. Installation
PNEG-1094 Farm Grain Bin - 4" Corrugation
43
Eave Safety Cage
Before attaching any pieces to the ladders of platform, some pre-assembly is required. Attach two (2)
safety cage brackets to the ladder section. (
for assembly details.) Bolt the
safety cage hoop adjuster plates onto the extension angle as shown. Using the proper configuration based
upon the diameter of the bin, bolt the safety cage hoop adapters together and attach to the safety cage
hoop halves. Bolt the safety cage hoop adapters and safety cage hoop halves together using the proper
holes based upon the diameter of the grain bin. Be sure to use the 5/16" x 3/4" bolt with the head of the
bolt to the inside of the safety cage. Bolt these assemblies to the safety cage brackets and hoop adjuster
plates, tightening the bolts as you go. The bottom assembly requires two (2) hoop halves and will be
positioned just below the platform as shown. Use the safety cage hoop adapter angle to secure the
two (2) hoop half assembly to the vertical entrance angle on the platform assembly.
Figure 6O