BabyTrend FB60408 - TRENDZ FASTBACK 3-IN-1 CAR SEAT - JELLY BEAN - Manual (Page 19)

35 36
10.0
Securing Toddler Seat in Your Vehicle
10.0
Securing Toddler Seat in Your Vehicle
3. The FastBack has (3) recline positions when
used as a toddler car seat. Adjust the seat
recline to the desired position for your child.
To adjust the recline angle pull the Recline
Handle and adjust the Recline Foot up or
down. (Fig 36-1)
4. Press the Yellow Release Tabs on both
sides (Fig 36-2), grasp the lower part
of the Car Seat, and slide the car seat
and pushing it firmly against the vehicle
seat as shown. (Fig 36-3)
Note: The LATCH Connectors will
automatically lock into place as they
retract into the car seat.
Attach the Tether Strap
Vehicle seating positions equipped
with LATCH will have top tether
anchors in most vehicles. Use
Tether Strap whenever possible.
1. Fasten the Tether Hook to the vehicle
tether anchor point. (Fig 36-4)
• Lengthen the Tether Strap and place over
top of headrest and into seat. (Fig 35-1)
Attach the Lower LATCH Connectors
1. Extend the LATCH Connectors by
pressing the LATCH Extend Button on
each side as shown. (Fig 35-2)
2. Secure the LATCH Connectors
to the vehicle LATCH lower
anchorages. Listen for the “click”
and check that both connectors
are securely attached to the lower
anchorages by pulling on the
Car Seat.
IMPORTANT: Always make sure
the LATCH Connectors are securely
connected to the vehicle lower
anchorages. (Fig 35-3)
35-2
35-3
35-1
36-1
36-3
36-2
36-4
LATCH lower
anchorage