BabyTrend FB60408 - TRENDZ FASTBACK 3-IN-1 CAR SEAT - JELLY BEAN - Manual (Page 26)

49 50
11.0
Securing Child with Built-in Safety Harness
11.0
Securing Child with Built-in Safety Harness
Replace the Cup/Game Holder by pushing it down into its slot until
the retainer button clicks and locks it into place.
11.3 Adjusting Flex-Sides™ Back Support
When using WITH the Built-in Safety Harness this Car Seat
features an adjustable Flex-Sides™ Back Support system. Adjusting
the seat back adjusts the Built-in Safety Harness to properly fit
as your child grows. NO harness re-threading is required.
To adjust the height of the seat back and harness straps:
1. Lift the fabric cover to reveal the Height
Adjustment Button. (Fig 50-1)
2. Firmly press in the Height Adjustment Button
and slide the seat back up or down to adjust
to the desired height. (Fig 50-2)
Note: The adjustable back has eight (8)
height positions. Check to make sure the
seat locks into one of the eight positions
before use.
cavity in the seat shell. Pull outward on
the metal clip while feeding the Crotch
Strap webbing downward until the
Crotch Strap metal clip is removed from
the slot. (Fig 49-1) DO NOT attempt to
completely remove the Crotch Strap
from the Car Seat.
4. Adjust the length of the Crotch Strap to
the desired length. For small children,
the length of the Crotch Strap is
shortened by wrapping additional strap
material around the metal clip. For
larger children, the length is increased
by unwrapping material from around
the metal clip. (Fig 49-2)
5. Reinsert the Crotch Strap metal clip
into the slot in the Crotch Strap cavity
while pulling upward on the Crotch
Strap buckle. Check that the Crotch
Strap metal clip is completely seated all
the way down in the slots before using
the Car Seat. (Fig 49-3)
6. Push the Crotch Strap buckle back up through the slot in the Seat
Pad and return the Seat Pad to its original position on the seat shell.
49-1
50-1
49-2
49-3
PUSH
50-2