BabyTrend FB60408 - TRENDZ FASTBACK 3-IN-1 CAR SEAT - JELLY BEAN - Manual (Page 40)

77 78
14.0
Accessories
14.1 Body Insert
To remove Body Insert:
1. Open Harness Clip by pressing button and
sliding apart.
2. Unbuckle the Harness Buckle by pressing
the red button.
3. Unhook the elastic loop from underneath the
Harness Adjuster Button housing. (Fig 78-1)
4. Push the Harness Buckle down through the
slot in the Body Insert.
5. Remove Body Insert.
To install Body Insert:
1. Place the Body Insert on the car seat.
2. Pull the Harness Buckle up through the slot
in the Body Insert.
3. Hook the elastic loop underneath the
Harness Adjuster Button housing. (Fig 78-2)
14.0
Accessories
14.0 OPTIONAL ACCESSORIES (on certain models ONLY)
WARNING!
DEATH or SERIOUS INJURY can occur:
IMPROPER USE OF THE OPTIONAL ACCESSORIES CAN
CAUSE THE CHILD RESTRAINT TO NOT PERFORM AS
DESIGNED RESULTING IN SERIOUS INJURY OR DEATH
IN A SUDDEN STOP, SHARP TURN OR CRASH.
NEVER allow the Body Insert to bunch or fold behind
your child. Discontinue use as your child grows.
Make sure that the Harness Covers DO NOT interfere with the
correct placement of the chest clip at armpit level. If Harness
Covers do interfere, remove them from the harness straps and DO
NOT use until your child grows and they no longer interfere.
BODY INSERT HARNESS COVERS
78-1
78-2