BabyTrend FB60408 - TRENDZ FASTBACK 3-IN-1 CAR SEAT - JELLY BEAN - Manual (Page 35)

67 68
13.0
Securing Backless Booster Seat in Vehicle
13.0
Securing Backless Booster Seat in Vehicle
4. Store the Crotch Buckle by pushing it
through the slot and tucking it away in
the empty space under the Seat Pad.
Store the Harness Adjuster Strap
and the Harness Connector Plates
by tucking them away in the same
space. (Fig. 68-1)
5. Push the Seat Pad down into place and
secure using the two elastic loops.
(Fig 68-2)
13.3 Reinstalling Flex-Sides™ Back
Support and Head Support
1. Unhook the back of the Seat Pad and lift
up to open hatch.
2. With the hatch open, lower the Back
Support and insert U-bar into hatch as
shown. (Fig 68-3) Ensure that U-bar is
properly aligned with hatch.
3. Release the “U-bar” one side at a time by
pressing the spring release buttons and
lifting up slightly on the corresponding
side of the assembly. (Fig 67-1)
4. Grasping both sides of the Back
Support, lift up and detach it from the
hatch. (Fig 67-2)
NOTE: When the Back Support is
removed, the instruction manual must
be stored in the storage pocket on the
underside of the Seat Pad. (Fig 67-2)
67-1
67-2
68-3
68-1
Storage
pocket
U-Bar
U-Bar
Hatch
Hatch
68-2
Elastic loops
Tab
U-Bar