Crown Audio IQ-MSD Turbo Software - Manual (Page 123)

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 123
5.3.2 Global Amplifier Controls
There are several manual controls that are global in nature and are controlled from a special window. To display
this window from the Control Block screen press ^. A sample is shown in Figure 5.9.
As their name suggests, the “all” amplifier controls simultaneously affect all amplifiers represented by the present
Control Block screen. This means that all on line amplifiers with legacy IQ P.I.P.s are controlled by the All PIP-IQ/
AP Control window (shown in Figure 5.9) which is accessed from the legacy IQ P.I.P. Control Block screen. And
all amplifiers with IQ2 P.I.P.s are controlled by the All IQ2 PIP Control window (not shown) which is accessed from
the IQ2 P.I.P. Control Block screen.
The global controls include: DSPI, Mute, Power, Link and Sel. The Now and Defer controls determine whether
changes are made instantaneously or whether they are deferred until the Send button is activated. The settings
of the DSPI, Mute and Power controls are restored to their previous values when the window is closed. However,
the Link and Sel controls settings are remembered after the window is closed.
Note: The IQ2 P.I.P.s also include a Save As Default button that allows you to save the all global control settings
as a default for future use.
Fig. 5.9 The Amplifier “All” (Global) Controls