Crown Audio IQ-MSD Turbo Software - Manual (Page 62)

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 62
3.6 Copying and Pasting an Entire Graphics Plate
There may be occasions when it is desirable to copy all graphics plate objects and paste them to another graphics
plate. To do this, press
C + A + c . This copies the contents of the present graphics plate to the copy plate
clipboard. A message appears to inform you that the graphics plate was successfully copied. Switch to the graphics
plate where you want the copy to be pasted. Paste the graphics plate that was copied to the copy plate clipboard
to the new graphics plate by pressing
C + A + v. All objects, including the Crown IQ logo, will be copied to the
plate being displayed.
3.7 Restoring a Graphics Plate to a “New” Condition
To restore a graphics plate to a new condition, press A + n. This removes all objects except the Crown IQ logo.
If the Display control (on the text-mode graphics plate control block) is set to Selected, a new GDM will be
automatically restored for each selected IQ component just as if this were a new graphics plate. If the Display
control is set to Memory, the graphics plate remains blank.
3.8 The Crown IQ Icon
The Crown IQ icon, shown in Figure 3.22, can be moved like other objects but it cannot be resized or deleted.
However, it has a special function—double-clicking on it with the left mouse button ({) summons the Toolbox. In
addition, objects cannot be placed on top of the Crown IQ icon. If desired, additional Crown IQ icons can be
created by pressing
A + i.
Fig. 3.22 The Crown IQ Icon