Crown Audio IQ-MSD Turbo Software - Manual (Page 68)

IQ–MSD Turbo 1.4 Advanced IQ System Software
Page 68
3.9.5 Saving the GDM
Now that the GDM has been assembled, it must be saved. Right click ({) on the GDM Container and let’s return
to the GDM Container Attributes window (Figure 3.24). Press the Save button and the following dialog box
(Figure 3.28) will open to prompt you for the GDM file name.
Enter the same file name you used in the OIF. You do not need to include the extension GDM because it will be
automatically added.
After the GDM has been saved you will not be able to edit it. This is to prevent an operator from accidentally
changing the size or location of an object in the GDM Container. To edit the GDM you will need to open its Attributes
window again and press the Edit button. You will then be able to edit the objects in the GDM. Important:
Don’t forget to return to the GDM Container Attributes window once more at the end to save the changes.
The next time you ask for a GDM for a legacy IQ P.I.P. you will get your custom GDM in place of the original
standard GDM. Figure 3.29 below shows several of the new GDMs side by side, each one controlling a different
amplifier.
Fig. 3.28 The Custom GDM Save Dialog Box
Fig. 3.29 The New GDM Replaces the Standard One That Came With Turbo