QTECH QSW-2800 Инструкция по настройке - Manual (Page 109)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
95
no lldp transmit med tlv inventory Inventory Management TLVs. The no
command disables the capability.
network policy {voice | voice-signaling |
guest-voice | guest-voice-signaling |
softphone-voice | video-conferencing |
streaming-video | video-signaling} [status
{enable | disable}] [tag {tagged |
untagged}] [vid {<vlan-id> | dot1p}] [cos
<cos-value>] [dscp <dscp-value> ]
no network policy {voice | voice-signaling |
guest-voice | guest-voice-signaling |
softphone-voice | video-conferencing |
streaming- video | video-signaling}
Configure network policy of the port,
including VLAN ID, the supported
application (such as voice and video), the
application priority and the used policy, and
so on.
civic location {dhcp server | switch |
endpointDev} <country-code>
no civic location
Configure device type and country code of
the location with Civic Address LCI format
and enter Civic Address LCI address mode.
The no command cancels all configurations
of the location with Civic Address LCI
format.
ecs location <tel-number>
no ecs location
Configure the location with ECS ELIN
format on the port, the no command cancels
the configured location.
lldp med trap {enable | disable}
Enable or disable LLDP-MED trap for the
specified port.
Civic Address LCI address mode
{description-language | province-state |
city | county | street | locationNum |
location | floor | room | postal | otherInfo}
<address>
no {description-language | province-state |
city | county | street | locationNum |
location | floor | room | postal | otherInfo}
Configure the detailed address after enter
Civic Address LCI address mode of the
port.
Global mode
lldp med fast count <value>
no lldp med fast count
When the fast LLDP-MED startup
mechanism is enabled, it needs to fast send
the LLDP packets with LLDP-MED TLV, this
command is used to set the value of the fast
sending packets, the no command restores
the default value.