QTECH QSW-2800 Инструкция по настройке - Manual (Page 233)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
219
31.2 DHCPv6 option37, 38
Configuration Task List
1. Dhcpv6 snooping option basic functions configuration
2. Dhcpv6 relay option basic functions configuration
3. Dhcpv6 server option basic functions configuration
1.DHCPv6 snooping option basic functions configuration
Command Description
Global mode
ipv6 dhcp snooping remote-id option
no ipv6 dhcp snooping remote-id option
This command enables DHCPv6 SNOOPING
to support option 37 option, no command
disables it.
ipv6 dhcp snooping subscriber-id option
no ipv6 dhcp snooping subscriber-id
option
This command enables DHCPv6 SNOOPING
to support option 38 option, no command
disables it.
ipv6 dhcp snooping remote-id policy {drop
| keep | replace}
no ipv6 dhcp snooping remote-id policy
This command is used to configure the
reforward policy of the system when receiving
DHCPv6 packets with option 37, which can
be:
drop, the system simply discards it with
option 37;
keep, the system keeps option 37 unchanged
and forwards the packet to the server;
replace, the system replaces option 37 of
current packet with its own before forwarding
it to the server. no command configures the
reforward policy of DHCPv6 packets with
option 37 as replace.
ipv6 dhcp snooping subscriber-id policy
{drop | keep | replace}
no ipv6 dhcp snooping subscriber-id
policy
This command is used to configure the
reforward policy of the system when receiving
DHCPv6 packets with option 38, which can
be:
drop, the system simply discards it with
option 38;
keep, the system keeps option 38 unchanged
and forwards the packet to the server;
replace, the system replaces option 38 of