QTECH QSW-2800 Инструкция по настройке - Manual (Page 172)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
158
no mls qos cos port; the no command restores the default
setting.
service-policy input <policy-map-name>
no service-policy input <policy-map-name>
Apply a policy map to the specified port;
the no command deletes the specified
policy map applied to the port. Egress
policy map is not supported yet.
Global Mode
service-policy input <policy-map-name> vlan
<vlan-list>
no service-policy input <policy-map-name>
vlan <vlan-list>
Apply a policy map to the specified VLAN
interface; the no command deletes the
specified policy map applied to the VLAN
interface.
4. Configure queue management algorithm and weight
Command Explanation
Global Mode
mls qos queue algorithm {sp | wrr}
no mls qos queue algorithm
Set queue management algorithm, the
default queue management algorithm is
wrr.
mls qos queue weight <weight0..weight3>
no mls qos queue weight
Set queue weight based a port, the
default queue weight is 1 2 3 4.
5. Configure QoS mapping
Command Explanation
Global Mode
mls qos map {cos-
intp <intp1…intp8> |
dscp-intp <in-dscp list> to <intp>}
no mls qos map {cos-intp | dscp-intp}
Set the priority mapping for QoS, the no
command restores the default mapping value.
6. Clear accounting data of the specific ports or VLANs
Command Explanation
Admin Mode
clear mls qos statistics [interface
<interface-name> | vlan <vlan-id>]
Clear accounting data of the specified ports or
VLAN Policy Map. If there are no parameters,
clear accounting data of all policy map.