QTECH QSW-2800 Инструкция по настройке - Manual (Page 171)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
157
different data streams in class mode; the
no command deletes the specified class.
set {ip dscp <new-dscp> | ip precedence <new-
precedence> | internal priority <new-inp> |
drop precedence <new-dp> | cos <new-cos>}
no set {ip dscp | ip precedence | internal
priority | drop precedence |cos }
Assign a new internal priority for the
classified traffic; the no command cancels
the new assigned value.
policy <bits_per_second>
<normal_burst_bytes> ({conform-action
ACTION | exceed-action ACTION} )
ACTION definition:
drop | transmit | set-dscp-transmit
<dscp_value> | set-prec-transmit
<ip_precedence_value> | set-cos-transmit
<cos_value> | set-internal-priority <inp_value>
| set-Drop-Precedence <dp_value>
no policy
Configure a policy for the classified flow.
Set corresponding action to different color
packets. The no command will delete the
mode configuration.
accounting
no accounting
Set statistic function for the classified
traffic. After enable this function under the
policy class map mode, add statistic
function to the traffic of the policy class
map. The messages can only red or
green when passing policy. In the print
information, in-profile means green and
out-profile means red.
Policy class map configuration mode
drop
no drop
transmit
no transmit
Drop or transmit the traffic that match the
class, the no command cancels the
assigned action.
3. Apply QoS to port or VLAN interface
Command Explanation
Interface Configuration Mode
mls qos trust dscp
no mls qos trust dscp
Configure port trust; the no command
disables the current trust status of the
port.
mls qos cos {<default-cos>} Configure the default CoS value of the