QTECH QSW-2800 Инструкция по настройке - Manual (Page 217)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
203
1. To enable/delete DHCPv6 service
Command Explanation
Global Mode
service dhcpv6
no service dhcpv6
To enable DHCPv6 service.
2. To configure prefix delegation pool
Command Explanation
Global Mode
ipv6 local pool <poolname>
<prefix|prefix-length> <assigned-length>
no ipv6 local pool <poolname>
To configure prefix delegation pool.
3. To configure DHCPv6 address pool
(1) To achieve/delete DHCPv6 address pool
Command Explanation
Global Mode
ipv6 dhcp pool <poolname>
no ipv6 dhcp pool <poolname>
To configure DHCPv6 address pool.
(2) To configure prefix delegation pool used by DHCPv6 address pool
Command Explanation
DHCPv6 address pool Configuration Mode
prefix-delegation pool <poolname>
[lifetime <valid-time> <preferred-time>]
no prefix-delegation pool <poolname>
To specify prefix delegation pool used by
DHCPv6 address pool, and assign usable
prefix to client.
(3) To configure static prefix delegation binding
Command Explanation
DHCPv6 address pool Configuration Mode
prefix-delegation <ipv6-prefix/prefix-
length> <client-DUID> [iaid <iaid>]
[lifetime <valid-time> <preferred-time>]
no prefix-delegation <ipv6-prefix/prefix-
length> <client-DUID> [iaid <iaid>]
To specify IPv6 prefix and any prefix required
static binding by client.
(4) To configure other parameter of DHCPv6 address pool
Command Explanation
DHCPv6 address pool Configuration Mode
dns-server <ipv6-address>
no dns-server <ipv6-address>
To configure DNS server address for DHCPv6
client.