GE Industrial Solutions DV-300 DC Drive Users Manual - Manual (Page 395)

DV-300 Adjustable Speed Drives
——— PARAMETER LISTS ———
10
1
10 - ParameTer lisTs
10.1 COMpLETE MAIN MENu LIST
Explanation of tables:
White text on black background Menu/submenu
White text on black background in brackets Function not accessible via keypad. The status of the correspond-
ing parameter is only displayed.
[FF] in the Parameter column Dimension based on the factor function
“No.” column Parameter number (decimal). The value 2000H (= decimal
8192) must be added to the number given in the “No.” col-
umn in order to obtain the index to access the parameter
via Bus , RS485 or Opt2. The parameters in the Drivecom
group can be accessed using the format and index specified
in the DRIVECOM power transmission profile (#21).
“Format” column Internal parameter format:
I= Integer (Example: I16 = Integer 16 bit)
U = Unsigned (Example: U32 = unsigned 32 bit)
Float = Floating point
“Value” column Minimum, maximum and factory parameter values.
If “S” the value is depending on the size of the device.
“Keypad” column” c = Parameter available via keypad
“RS485/BUS/Opt2-M” column
(low priority) Parameter available via RS485, field Bus or via the DGFC
manual communication (see the DGFC user manual)
The numbers indicate what has to be sent via interface line in
order to set the single parameters.
“Term.” column Parameter addressable to one of the analog or digital input/out-
put terminals.