Net Optics 10_100_1000BaseT Tap - Manual (Page 5)

Gig Zero Delay Tap & 10/100/1000BaseT Tap
2
Simply Plug It In
Full-duplex monitoring is a snap when each side of the signal is sent to
a separate NIC on the monitoring device. All network and monitoring
cables necessary for plug-and-play deployment are included with the Tap.
Security and Visibility
Without an IP address, monitoring devices are isolated from the
network, dramatically reducing their exposure to attacks. However, the
monitoring device connected to the Tap still sees all full-duplex traffic
as if it were in-line, including Layer 1 and Layer 2 errors.
Reliability
For extra uptime protection, Net Optics Gig Zero Delay Taps and
10/100/1000 BaseT Taps offer redundant power connections. Should
the primary power source fail, the Tap automatically switches to the
backup power source. Power LEDs on the front of the Tap indicate the
current power source.
Warning! _______________________________________________________
TP-CU3-ZD and TP-CU3-ZD-DC only: This product contains a NiMH
battery. Consult your shipping carrier regarding regulations on safe
shipping of NiMH batteries.
_________________________________________________________________
Warning! _______________________________________________________
TP-CU3-ZD and TP-CU3-ZD-DC only: Electrical Shock Hazard. No
user replaceable parts. Do not open chassis. Return unit to Net Optics
for servicing.
_________________________________________________________________
Note: __________________________________________________________
TP-CU3-ZD and TP-CU3-ZD-DC only: Battery Disposal: Dispose
of used batteries properly. Contact your local authorities regarding
disposal of this battery.
_________________________________________________________________