Net Optics iBypass HD - Manual (Page 19)

15
iBypass HD
Warnings and Symbols
Warnings on product
WARNING: Warranty void if removed
Two of the labels illustrated above cover screws on the chassis top cover near the front corners. They prevent you
from taking the cover off without voiding your warranty. You should not take the cover off because there are no
user-serviceable parts inside, and there is a danger of electrical shock.
Symbols on product
Indicates WEEE compliance
Indicates CE compliance
Indicates RoHS compliance
Indicates C-Tick compliance
Indicates VCCI compliance
Indicates MET compliance (U.S.A. safety)
Connect the Local CLI Interface
Configuration options and device status can be accessed using the iBypass HD Command Line Interface (CLI). You can
run the CLI locally over the RS232 serial port or remotely over the Management port.
To run the CLI locally, connect a cable from the Console RS232 RJ45 port on the back of the iBypass HD chassis to your
computer. You can use a standard CAT5 network cable such as the one supplied with the unit; an adapter is provided to
connect one end of the cable to a DB9 serial port on your computer. Alternately, you can obtain a USB serial adapter
from you local computer store, and use it to connect through a USB port on your computer.
To access the iBypass HD CLI, the computer needs to have terminal emulation software such as HyperTerminal on
Windows, or minicom on Unix or Linux.