Asus RS120-E4/PA2 - Manual (Page 104)

5-40 Chapter 5: BIOS setup
Exit & Save Changes
Select this option then press <Enter>, or simply press <F10>, to save your changes
to CMOS before exiting the Setup utility.
When a confirmation window appears, select [OK] then press <Enter> to save your
changes and exit Setup. If you wish to cancel the command, select [Cancel] then
press <Enter> to return to the Exit menu.
Exit & Discard Changes
Select this option then press <Enter> to exit the Setup utility without saving your
changes.
When a confirmation window appears, select [OK] then press <Enter> to discard
your changes and exit Setup. If you wish to cancel the command, select [Cancel]
then press <Enter> to return to the Exit menu.
Discard Changes
Select this option then press <Enter> to discard the changes that you made, and
restore the previously saved settings.
When a confirmation window appears, select [OK] then press <Enter> to discard
the changes, and load the previously saved settings. If you wish to cancel the
command, select [Cancel] then press <Enter> to return to the Exit menu.
If you made changes to any of the settings in the menus, pressing <Esc> does
not immediately exit this menu. A confirmation window appears and prompts you
to either save your changes or cancel the command. Select one of the options
from this menu to exit.
5.8 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values for the
BIOS items, and save or discard your changes to the BIOS items.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Security Boot Exit
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults