2 installing the cover – Asus RS120-E4/PA2 User Manual
Page 19
Advertising
2-3
ASUS RS120-E4/PA2
2.1.2
Installing the cover
1. Position the cover on top of the chassis with the thumbscrews on the rear,
and leaving a gap of about half an inch from the front panel.
3. Slide the cover toward the front until it snaps in place.
4. Tighten the thumbscrews on the rear to secure the cover.
2. Make sure that the side markings on the cover (two on each side) are aligned
to the grooves on the chassis.
Grooves
Side markings
Thumbscrews
Advertising