Asus RS120-E4/PA2 - Manual (Page 110)

6-4 Chapter 6: RAID configuration
3. The utility main window appears. Use the arrow keys to select an option from
the Management Menu, then press <Enter>. Refer to the Management Menu
descriptions on the next page.
At the bottom of the screen is the legend box. The keys on the legend box
allow you to navigate through the setup menu options or execute commands.
The keys on the legend box vary according to the menu level.
6.2 LSI Logic Embedded SATA RAID Setup Utility
The LSI Logic Embedded SATA RAID Setup Utility allows you to create RAID 0 and
RAID 1 set(s) from SATA hard disk drives supported by the motherboard ICH7R
Southbridge chip.
To enter the LSI Logic Embedded SATA RAID Setup Utility:
1. Turn on the system after installing all the SATA hard disk drives.
2. During POST, the LSI Logic Embedded SATA RAID Setup Utility automatically
detects the installed SATA hard disk drives and displays any existing RAID
set(s). Press <Ctrl> + <M> to enter the utility.
The LSI Logic Embedded SATA RAID auto configures to RAID 1 when the SATA
to RAID Mode is enabled.