Asus RS120-E4/PA2 User Manual
Page 114
Advertising
6-8
Chapter 6: RAID configuration
6. Select
RAID from the Logical Drive menu, then press <Enter>.
7. Select the RAID level from the menu, then press <Enter>.
You need at least two identical hard disk drives when creating a RAID 1 set.
8. When creating a
RAID 1 set, select Stripe Size from the Logical Drive
menu, then press <Enter>.
When creating a
RAID 0 set, proceed to step 10.
9. Key-in the stripe size, then press <Enter>.
For server systems, we recommend that you use a lower array block size. For
multimedia computer systems used mainly for audio and video editing, we
recommend a higher array block size for optimum performance.
Advertising