Asus RS120-E4/PA2 - Manual (Page 95)

ASUS RS120-E4/PA2 5-31
Resume On Ring [Disabled]
When set to [Enabled], the system enables the RI to generate a wake event while
the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume On LAN [Disabled]
When set to [Enabled], the system enables the LAN to generate a wake event
while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume On PME# [Disabled]
When set to [Enabled], the system enables the PME to generate a wake event
while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This
feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the left button of a PS/2
mouse to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event.
Configuration options: [Disabled] [Enabled]
The RTC Alarm Date and System Time items appear only when the Resume
On RTC Alarm item is enabled.
RTC Alarm Date [15]
To set the alarm date, highlight this item and press the <+> or <-> key to
make the selection. Configuration options: [Everyday] [1] [2] [3]... ~ [31]
System Time [XX:XX:XX]
To set the system time, use <Enter>, <Tab> or <Shift-Tab> to highlight the hour/
minute/second fields and press the <+> or <-> key to configure the system time.
Configuration options: [00] [1]... ~ [23]