Asus RS120-E4/PA2 - Manual (Page 111)

ASUS RS120-E4/PA2 6-5
Menu Description
Configure
Allows you to create RAID 0 or RAID 1 set using the Easy
Configuration or the New Configuration command. This menu
also allows you to view, add, or clear RAID configurations or
select the boot drive
Initialize Allows you to initialize the logical drives of a created RAID set
Objects
Allows you to initialize logical drives or change the logical drive
parameters
Rebuild Allows you to rebuild failed drives
Check Consistency
Allows you to check the data consistency of the logical drives
of a created RAID set
6.2.1 Creating a RAID 0 or RAID 1 set
The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID 0
or RAID 1 set using two types of configurations: Easy and New.
In Easy Configuration, the logical drive parameters are set automatically including
the size and stripe size (RAID 1 only).
In
New Configuration, you manually set the logical drive parameters and assign
the set size and stripe size (RAID 1 only).
Using Easy Configuration
To create a RAID set using the Easy Configuration option:
1. From the utility main menu, highlight Configure, then press <Enter>.
2. Use the arrow keys to select Easy Configuration, then press <Enter>.