8 apm configuration, Power management/apm [enabled, Video power down mode [suspend – Asus RS120-E4/PA2 User Manual
Page 94: Hard disk power down mode [suspend, Suspend time out(minnute) [disabled, Throttle slow clock ratio [50, Power button mode [on/off, Restore on ac power loss [last state
5-30
Chapter 5: BIOS setup
5.4.8
APM Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
Enable or disable APM.
APM Configuration
Power Management/APM
[Enabled]
Video Power Down Mode
[Suspend]
Hard Disk Power Down Mode
[Suspend]
Suspend Time Out(Minnute)
[Disabled]
Throttle Slow Clock Ratio
[50%]
Power Button Function
[On/Off]
Restore on AC Power Loss
[Last State]
Resume On Ring
[Disabled]
Resume On LAN
[Disabled]
Resume On PME#
[Disabled]
Power On By PS/2 Keyboard
[Disabled]
Power On By PS/2 Mouse
[Disabled]
Resume On RTC Alarm
[Disabled]
Power Management/APM [Enabled]
Allows you to enable or disable the motherboard Advance Power Management
(APM) feature. Configuration options: [Enabled] [Disabled]
Video Power Down Mode [Suspend]
Allows you to select the video power down mode
Configuration options: [Disabled] [Standby] [Suspend]
Hard Disk Power Down Mode [Suspend]
Allows you to select the hard disk power down mode
Configuration options: [Disabled] [Standby] [Suspend]
Suspend Time Out(Minnute) [Disabled]
Allows you to select the specified time at which the system goes on suspend mode.
Configuration options: [Disabled] [1 Min] [2 Min] [4 Min] [8 Min] [10 Min] [20 Min]
[30 Min] [40 Min] [50 Min] [60 Min]
Throttle Slow Clock Ratio [50%]
Allows you to select duty cycle in throttle mode.
Configuration options: [87.5%] [75.0%] [62.5%] [50%] [37.5%] [25%] [12.5%]
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the power button
is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
BIOS SETUP UTILITY
Advanced