Asus NAS-M25 - Manual (Page 12)

1 Chapter 1: Knowing your NAS
1.4 Hardware overview
1.4.1 Front view
Power button
( with LED)
HDD1 LED
HDD LED
Network LED
USB button ( with LED, for the
front USB .0 port only)
• One Touch Copy
• USB unmount
USB .0 port
• One Touch Copy
• Folder sharing
Power button ( with LED) • Press and hold until the power LED starts blinking blue to
turn NAS ON.
• Press and hold for more than five seconds until the power
LED starts blinking blue to turn NAS OFF.
USB button
( with LED, for the front USB .0
port only)
• One Touch Copy
Press to copy data from the front USB .0 device to NAS.
See 5.3.2 Copying front USB data via One Touch Copy for
details.
• USB unmount
Press and hold for more than three seconds until the USB
LED turns OFF to unmount the front USB .0 device.
USB .0 port • One Touch Copy
Connect a USB .0 device such as a digital camera and USB
flash drive to this port and press the USB button to copy
data from it to NAS.
• Folder sharing
Connect a USB flash drive or USB HDD to this port to add
extra storage capacity for folder sharing.
Front buttons / ports
E6146_NAS-M25_Manual.indd 12 11/30/10 9:39:12 AM