22 unmounting a usb 2.0 device – Asus NAS-M25 User Manual
Page 53
Advertising
5
Chapter : Managing your NAS via its Web GUI
3.3.22 Unmounting a USB 2.0 device
Unmount your USB .0 device before removing it from your NAS, otherwise you might
lose your data on the USB .0 device.
To unmout a USB 2.0 device:
1. From the navigation pane, click Disk > Disk Status.
. In the USBDisk Drive Information area (only appears when you have plugged a USB 2.0
device to the NAS), select a USB .0 device and click Unmount.
NOTE:
You may also unmount the front USB .0 device using the USB button.
To do this:
Press and hold the USB button for more than three seconds until the USB LED turns OFF.
USB button
(
with LED, for the front USB .0 port only)
E6146_NAS-M25_Manual.indd 53
11/30/10 9:39:35 AM
Advertising