Asus NAS-M25 - Manual (Page 36)

6 Chapter : Managing your NAS via its Web GUI
IMPORTANT:
DO NOT enable the DHCP server if there is already a DHCP server on your LAN. Doing so will
cause network access error.
3.3.5 Enabling the DHCP server
Set your NAS as a DHCP server that assigns dynamic IP addresses to the clients on the
LAN.
To enable the DHCP server:
1. From the navigation pane, click Server > DHCP Server.
. Configure the following settings:
DHCP Server: Select Enable.
Starting IP Address / Ending IP Address: Set the range of the IP address.
Lease Time: Set the length of time that a DHCP client can use the assigned IP address.
. Click Apply.
Flow Control: Set a upper limit for the download/upload speed to conserve local
bandwidth.
Client Language: Select the client language.
Anonymous FTP: When this item is enabled, you can log into the FTP server using an
anonymous account.
Anonymous download folder: Allows you to select the folder in your NAS-M5 to
store your downloaded files using an anonymous account.
Anonymous upload folder: Allows you to select the folder in your NAS-M5 to store
your uploaded files using an anonymous account.
. Click Apply.
E6146_NAS-M25_Manual.indd 36 11/30/10 9:39:27 AM