Asus GigaX2024B - Manual (Page 75)

63
GigaX2024B L2 Managed Switch User Manual
5.3.5.5 ip dhcp client
This command set system interface to get ip via dhcp server.
CLI Syntax: ip dhcp client
Example: (config-if)#ip dhcp client
5.3.5.6 ip route
This command sets the ip route in this system.
CLI Syntax: ip route A.B.C.D A.B.C.D (A.B.C.D|INTERFACE)
Example: (config)# ip route 192.168.20.0 255.255.255.0 192.168.20.1
5.3.6 Spanning Tree
5.3.6.1 show spanning-tree summary
To show spanning-tree active.
CLI Syntax: show spanning-tree summary
Example: ASUS# show spanning-tree summary
5.3.6.2 spanning-tree enable and disable
Enable/Disable the spanning tree.
CLI Syntax: spanning-tree (enable|disable)
Example: ASUS# spanning-tree disable
5.3.7 Link aggregation
5.3.7.1 trunk aggregation group
Use the aggregation-link trunk group configuration command on the switch to
configure trunk aggregation group.
CLI Syntax: aggregation-link group <1-6> IFLIST
Example: ASUS#aggregation-link group 1 fa1/0/1-3