Asus GigaX2024B - Manual (Page 74)

62
GigaX2024B L2 Managed Switch User Manual
Note
Note
5.3.5 IP interface
5.3.5.1 show vlan name string
Use the show vlan user EXEC command to display the parameters for all
configured VLANs or one VLAN (if the VLAN ID or name is specified) on the
switch.
CLI Syntax: show vlan name string
Example: ASUS# show vlan name VLAN1
The vlan1 is for system purpose, for example, for firmware
upgrade, management, and so on.
5.3.5.2 Create a vlan entry
Use the vlan vid command to create vlan entry on the switch. Use the name
string command to create vlan entry with string on the switch.
CLI Syntax: vlan id
Example: (config)# vlan 3
(config-vlan)# name vlan3
5.3.5.3 interface vlan VLAN-ID
This command changes the operation to vlan interface command mode.
CLI Syntax: interface vlan VLAN-ID
Example: interface vlan 1
5.3.5.4 ip address
This command sets the ip address for indicated interface.
CLI Syntax: ip address A.B.C.D/M
Example: (config-if)# ip address 192.168.20.121/24
The interface name does not show up during configuration.
Please keep in mind what you are configuring.