Asus GigaX2024B - Manual (Page 29)

17
GigaX2024B L2 Managed Switch User Manual
4.4 Physical interface
The Physical Interface shows the realtime Ethernet port status. You can configure
the port in following fields:
Port: selects the port to configure
Admin: enables/disables the port
Mode: set sthe speed and duplex mode
Flow Control: enables/disables 802.3x flow control mechanism
Switchport Mode: sets port to trunk mode or access mode
Admin port VLAN: assign the selected port to specific PVID
DHCP-Snoop: enable/disable DHCP snooping function
DHCP-Snooping: assign the selected port to be untrusted or trusted port
Select the corresponding port number and configure the port setting, then
click on the Modify button. The field you change will update the content of the
display window. However, the new settings do not take effect until the “Save
Configuration” is executed.
Runtime Status Window: displays the following information for each port
Ethernet Link: the link is connected or not connected.
STP Status: the STP status
Duplex: the duplex mode
Speed: link speed
Flow Control: the setting value to enable or disable 802.3x flow control
mechanism.
Figure 16. Physical interface - configuration