Asus KFN5-D SLI - Manual (Page 120)

5-10 Chapter 5: RAID configuration
2. When the array details appear, select the hard disk drive you want to
clear, then press <C>. A confirmation message appears.
5.2.7 Clearing the disk data
You will lose all data when you clear a disk!
To clear the disk data:
1. From the Array List, use the up or down arrow keys to select a RAID
set, then press <Enter>. The RAID set details appear.
[Ctrl-X]Exit [↑↓]Select [B]Set Boot [N]New Array [ENTER]Detail
NVIDIA RAID Utility Oct 5 2004
- Array List -
Boot Id Status Vendor Array Model Name
No 4 Healthy NVIDIA STRIPING XXX.XXG
No 3 Healthy NVIDIA MIRRORING XXX.XXG
[R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return
Array 1 : NVIDIA MIRROR XXX.XXG
- Array Detail -
RAID Mode: Striping
Striping Width: 1 Striping Block: 64K
Adapt Channel M/S Index Disk Model Name Capacity
2 1 Master 0 XXXXXXXXXXXXXXXXX XXX.XXGB
1 0 Master 1 XXXXXXXXXXXXXXXXX XXX.XXGB
3. Press <Y> to clear the disk data, or press
<N> to cancel. Press <C> to clear disk. The
following confirmation message appears.
Clear disk data?
[Y] Yes [N] Cancel