Asus KFN5-D SLI - Manual (Page 40)

2-20 Chapter 2: Hardware information
2. Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
3. Sil3132 RAID controller setting (3-pin 3132_EN1)
This jumper allows you to enable or disable the Silicon Image Sil3132
RAID controller. Set this jumper to 1-2 (Default) to enable the Sil3132
RAID controller.
KFNS-D-SLI
R
KFN5-D SLI Keyboard Power Setting
KBPWR1
(Default)
+5V +5VSB
2 3 1 2
KFNS-D-SLI
R
KFN5-D SLI 3132_EN1 Setting
3132_EN1
Enabled Disabled
(Default)
1
2
2
3