Asus KFN5-D SLI - Manual (Page 124)

5-14 Chapter 5: RAID configuration
2. Select RAID 1 then
press <Enter> to
display the following.
MAIN MENU
Auto configuration
Manual configuration
c. The selection bar moves to
the Physical Drive menu.
Using the up or down
arrow keys, select a drive
then press <Enter> to set
the first drive of the RAID
set.
d. Repeat step c to set the second drive. The number of available
drives depend on the installed and enabled physical drives in the
system.
e. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press <Enter>.
f. Press <Y> to confirm or <N> to return to the Main Menu.
TIP: For server systems, we recommend using a lower array chunk
size. For multimedia computer systems used mainly for audio and
video editing, we recommend a higher array chunk size for optimum
performance.
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
5.3.4 Creating a RAID 1 set (Mirrored)
To create a RAID 1 set:
1. From the Silicon Image
configuration utility
main menu, select
Create RAID set then
press <Enter>. The
following sub-menu
appears.
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
RAID0
RAID1
RAID10
SPARE DRIVE
RAID0
RAID1
SPARE DRIVE
CONCATENATION