Asus KFN5-D SLI - Manual (Page 92)

4-26 Chapter 4: BIOS setup
4.4.5 Onboard Devices Configuration
Configure Win627THF Super IO Chipset
Serial Port1 Address
[3F8/IRQ4]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
OnBoard Game/MIDI Port [Disabled]
Configure Onboard Device
Onboard BCM5754 Lan [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard T43AB22A 1394 [Enabled]
Onboard Sil3132 SATALink [SATA2 Mode]
Onboard Serial-ATA BOOTROM [Disabled]
Allows BIOS to Select
Serial Port1 Base
Addresses.
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4]
[2E8/IRQ3]Parallel Port Address [378]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-Directional] [EPP] [ECP]
EPP Version [1.9]
Allows you to select the Parallel Port EPP version.
Configuration options: [1.9] [1.7]
The following item appears when the Parallel Port Mode is set to EPP.
MCP55(SB) to K8(CPU) LinkWidth [16 16 ]
Sets the Hyper Transport width.
Configuration options: [4 4 ] [8 8 ] [16 16 ]