Asus KFN5-D SLI - Manual (Page 98)

4-32 Chapter 4: BIOS setup
4.5.3 APM Configuration
Power Management/APM [Disabled]
Restore on AC Power Loss [Last State]
<Enter> to select
whether or not to
restart the system
after AC power loss.
Power Management/APM [Disabled]
Allows you to enable or disable the motherboard Advance Power
Management (APM) feature. Configuration options: [Enabled] [Disabled]
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
Video Power Down Mode [Suspend]
Allows you to select the video power down mode.
Configuration options: [Disabled] [Standby] [Suspend]
Green PC Monitor Power State [Standby]
Allows you to select the PC monitor power state. Configuration options:
[Disabled] [Standby] [Suspend]
Force Throttle [Disabled]
Enables or disables the force to thermal throttling function. Configuration
options: [Disabled] [Enabled]
The following items appear when the Power Management/APM is
enabled.