Asus Adaptec 2025 ZCR - Manual (Page 109)

D-4
Command Line Interface
Accessing the CLI
The method you use to access the CLI depends on the operating
system, as described below.
Accessing the CLI in MS-DOS
To access the CLI from the MS-DOS prompt, move to the directory
containing the
afacli executable, then type afacli .
Accessing the CLI in Windows
To access the CLI in Windows:
Note: The following procedure assumes that you accepted the
default location for the software during installation.
1 Click the Start button.
2 Click Programs.
3 Browse to Adaptec Storage Manager.
The Adaptec program group is displayed.
4 Click CLI.
Note: In Windows, when the CLI executes a background
command, it displays status information in the title bar of a DOS
command prompt window. The status information includes a
percentage indicating a level of completion.
Accessing the CLI in Unix
To access the CLI in Unix, display a window and type aaccli in
any directory. When the system displays the CLI> prompt, you can
use CLI commands. The status information appears at the bottom of
the CLI window.
For the commands to work in any directory, the path in the startup
file (
.login or .cshrc ) must include the directory where the software
is installed. Refer to your operating system documentation for
information on setting up directory paths in the
.login and .cshrc
files.