Asus Adaptec 2025 ZCR - Manual (Page 139)

D-34
Command Line Interface
Enclosure Commands
Note: You can use the enclosure commands only with
enclosures that support Version 1.0 of the SAF-TE specification.
enclosure activate slot {enclosure} {slot}
Activates a device in a slot in the SAF-TE enclosure.
Parameters
{enclosure} —ID number of the enclosure management device
on which to activate a device.
{slot} —Unit number of the slot.
enclosure identify slot [/stop={boolean}] {enclosure}
{slot}
Identifies a device in the enclosure.
Parameters
{enclosure} —ID number of the enclosure management device
on which to identify a slot.
{slot} —Unit number of the slot.
Switches
/stop —Specifies whether to stop identifying the slot.
enclosure list [/all={boolean}] [/full={boolean}]
[{enclosure}]
Lists components for one or all enclosure devices.
Parameters
{enclosure} —ID number of the enclosure management device
whose associated components to display.
Switches
/all —Lists all enclosures on the system.
/full —Displays detailed component information.
enclosure prepare slot {enclosure} {slot}
Prepares a device in a slot for insertion or removal.