Using sataselect and scsiselect, Using sata, Using sata select and scsi select – Asus Adaptec 2025 ZCR User Manual

Page 74

Advertising
background image

A-9

Adaptec RAID Configuration Utility (ARC)

Using SATASelect and SCSISelect

The SATASelect and SCSISelect utilities allow you to change
controller and device settings without opening the computer
cabinet or handling the controller. To access these utilities:

1

Restart the computer, then press Ctrl+A when prompted to
access the ARC utility.

2

If multiple controllers are installed, select the controller you
want to configure, then press Enter.

3

From the ARC menu, select SATASelect Utility or SCSISelect
Utility

.

The available options are listed in the table below.

These options are discussed in the sections that follow.

To select a menu option, browse with the arrow keys to the
option, then press Enter. In some cases, selecting an option
displays another menu. You can return to the previous menu at
any time by pressing Esc.

To restore the original default values, return to Configure/View
Host Adapter Settings, then press F6.

4

To exit the utility, press Esc until a message prompts you to exit.
(If you changed any host adapter settings, you are prompted to
save the changes before you exit.) Choose Yes to exit and restart
the computer. Any changes you made take effect after restart.

This section...

Applies to...

Controller Configuration Options

All controllers

SATA Configuration Options

SATA controllers only

SCSI Configuration Options

SCSI controllers only

Advertising
This manual is related to the following products: