Asus Adaptec 2025 ZCR - Manual (Page 130)

D-25
Command Line Interface
Parameters
{container} —ID number of the array on which to set the I/O
delay.
{integer} —Number of milliseconds the controller waits
between I/O operations.
container set label {container} {label}
Assigns a new label to the array.
Parameters
{container} —ID number of the array to which to assign a
label.
{label} —Specifies the label to assign.
container show cache {container}
Displays caching parameters for an array.
Parameters
{container} —ID number of the array whose associated cache
parameters to display.
container show failover [{container}]
Displays an array’s assigned failover disks.
Parameters
{container} —ID number of the array whose assigned failover
disks to display.
container unmirror {container}
Changes the RAID 1 (mirror) to a volume and frees the
redundant space.
Parameters
{container} —ID number of the RAID 1 to unmirror.
Controller Commands
Use the Controller commands to display the status of a variety of
controller attributes and to perform such tasks as pausing or
resuming I/O, and enabling or disabling automatic failover.