YSI BOD Analyst Pro - Manual (Page 13)

YSI BOD Analyst Pro ® User Manual 13
a 4010-2 or 4010-3 make sure the OBOD probe is connected to channel 1, see instrument
manual.
5. Click Test Instrument Communication. A successful connection will return a message
showing relevant data or information from the instrument. If the connection is not properly
set an error code will return with possible causes listed.
Refer to figures below showing the communication screens. In the first example a ProODO
system was set up successfully communicating via PC port COM5. Note that COM5 has an
accurate description of the communication source, YSI Professional Series Instrument. The Test
Communication return indicates a meaningful return message from the ProODO.
In the examples below note the PC screen returns when the YSI 5100 communication was not
placed in remote mode (left) and when the 5100 was successfully configured (right).
With BOD Analyst Pro software installed and instrument communication successfully configured
now refer to the “Quick Start” instructions in the next section. Note – it is not necessary to
communicate directly with BOD Analyst Pro with your YSI instrument to use the program.