YSI BOD Analyst Pro - Manual (Page 45)

YSI BOD Analyst Pro ® User Manual 45
Enter the Sample Volume (ml) and the Seed volume (ml). Confirm with an Enter or Click to
another field. Now click Apply Changes (lower right of Bench Sheet). The new Bench Sheet will
reflect the addition of the new bottle (dilution) for that sample (Effluent in the above example).
If you would like to add a duplicate dilution (same sample volume) to one already in the Sample
you may use New Bottle to perform this addition.
5.8 ADD A SAMPLE TO THE BATCH
If you need to add a Sample (new Sample name with one or more dilutions) after you have
entered the Batch into the Bench Sheet use the New Sample icon (upper left quadrant of Bench
Sheet screen). Click the New Sample icon. An Add Sample form will pop up (see example
below). Under Choose Sample there will be all of the samples you have defined in the current
database file.
Double click on the Sample Name in the list that you want to add and verify the information is
correct. Click OK to add the sample to the Bench Sheet. If required edit the Sample dilutions and
Seed information, then click OK. If you edit the information it applies only to this batch and does
not permanently change your Sample Setup record for the Sample Name you chose.