YSI BOD Analyst Pro - Manual (Page 18)

YSI BOD Analyst Pro ® User Manual 18
5. Set up a Batch (Build Batch). From the Bench Sheet screen click on the Calendar icon,
select today’s date, and confirm by clicking Use This Date. The date will appear in the
Sample Date field.
Now click on the Build Batch icon near the center
of the screen. The Build Batch appears without
entries in the bench sheet table. However, the
defined Samples will appear in the field labeled
Choose Samples. Many samples can be listed here
but in the quick start example just five (5) samples
were configured.
Continue by double clicking on each sample from
the list that you want added to your batch table.
Add all 5 samples to the batch. If later you decide
the order of samples listed needs to be changed
click on the specific Sample Name (in the table) that you want to move and use the arrow
icons on the right to organize the batch to your preference. You may also Delete individual
samples or Clear the entire batch from the setup table.
Notice that there is a field named Choose Group. The Group function allows you to create
batches that may be used frequently and then you can build a batch with one click. A Group
was not created in the Quick Start section. For more information on creating Groups and
building Batches see Section 4 and Section 5, respectively.
Once the batch is built you click OK. The Batch you created will appear on the main screen
(Bench Sheet). In this example there are 5 Samples consisting of 13 bottles. Seed is added to
8 of the bottles as shown in the Bench Sheet below.