YSI BOD Analyst Pro - Manual (Page 33)

YSI BOD Analyst Pro ® User Manual 33
4.3 ADDING A GROUP AND CHOOSING SAMPLES
From the Group Setup form, click the Add New button. A blank form appears (see above). Enter
the Group Name (Thursday), select names from the Choose Samples field and move each to the
Samples in Group field.
All available samples
will be listed.
Add Samples by either
double clicking on
individual names under
Choose Samples, or use
the >> icon to enter all
sample names at once.
You can likewise remove
all samples from the
right field by using the
<< icon or double click
on the names in the
Samples in Group field
to remove them from the
group one at a time.
You may add samples in
any order. If the >> icon
is used all samples move
in the order shown in the
Choose Samples field.
You may later change the sample order to suit your needs in the Build Batch form.
There is no limit to the number of Samples that can be in a Group (Batch).
4.4 EDITING
A GROUP
Use the toolbar buttons < and > to navigate to the Group that you want to edit. Change Samples
in a Group as described above using the double click operation on a selected Sample Name or the
“move all” (<< or >>) operation.
You can also change the Group Name at any time with no effect on historical data. Changes are
automatically saved in the data file once you click OK when you close the Group Setup form.
4.5 DELETING A GROUP
Use the toolbar button > or < to select the group to delete. Use the delete button >X to delete the
group from the list. You will need to confirm the deletion by clicking OK (see below).