YSI BOD Analyst Pro - Manual (Page 39)

YSI BOD Analyst Pro ® User Manual 39
remove one Sample at a time as described in 5.4.2 or use the Delete button on the Open Batch
list.
5.4.4 ADDING MORE DILUTIONS AND CHANGING SEED CONDITIONS
If you build your Batch from preconfigured Samples and decide that it may be useful to add
additional dilutions (5 total per sample), you can click on the cell in the table and type in the
desired sample volume (“dilution”). The value would be ml sample or % sample depending on
your setup. In the example below a fourth dilution of 200 ml sample has been added by typing the
value into Column 4 in the table.
When you confirm with OK you will see a pop-up related to “replace all data previously
collected”. Click OK to this message and the new dilution will be added and the Bench Sheet will
reappear modified as you would expect.
In addition to modifying the Batch for dilutions you may also change seed and seed quantity. In
the case of seed changes the predefined seed samples will appear in a drop down menu as shown
in the figure below. Click on the seed name and confirm your changes with OK.