YSI BOD Analyst Pro - Manual (Page 47)

YSI BOD Analyst Pro ® User Manual 47
NOTE: In the example above both the added bottles and the added sample are shown in the
Bench Sheet table. So, after entering a Group defined with 13 bottles you end up with 16 bottles
due to changes you implemented during the Initial Read operation.
5.9 MARKING A BOTTLE
Use the Manual Mark icon to mark rows in the Bench Sheet table that are independent of the
criteria that are set. These are choices you make for whatever reason. The row turns green
background and a note in the Check Result section indicates that it is a Manual Mark for that row
when you click on the Sample Name.
The ability to mark or unmark records enables the user to make judgment calls in selecting or
rejecting BODs. Tests are automatically marked as unacceptable when data is changed. To
manually mark a test that meets the current criteria, move the cursor to the row and select the
Manual Mark button. The test will be removed from the final BOD calculation
5.10 UNMARKING A BOTTLE
Use the Manual Unmark icon to unmark rows in the Bench Sheet table. These are choices you
make and regardless of whether the row was marked manually or by a criteria test, the program
puts the results of this row back into the calculations for Final BODs. The row will no longer be
highlighted green but a note in the Check Results section will indicate that the Manual Unmark
function was used.
5.11 MANUAL CHECK
In Criteria Setup you may check the box next to Apply Criteria after final Readings. If this
box is checked all criteria are checked automatically after all of the Final DOs are read. If,
however, that box was not checked, the Manual Check icon can be used to test criteria. If you
want to check criteria at any time, click this icon.
5.12 FIELD DESCRIPTIONS
Sample Date